Clarion AUTOPC 310C Owner's Manual page 165

How to reboot the System
Use reboot procedures in the following order:
1. Turn off the ACC power.
2. Remove the DCP.
3. If the system stops normal functions or cannot recognize peripherals,
always try the Warm reboot first, as described on the next page.
4. If Warm reboot does not bring the system back to operational status,
then try Cold reboot. NOTE: This procedure will initialize all data
to the shipment condition. To recover your customized data you
will need to restore the backup data. See the Backup/Restore
chapter for further information.
5. NOTE: Press switches gently, switches can be damaged by use
of force.
Clarion AutoPC Owner's Manual
153