Clarion AUTOPC 310C Owner's Manual page 49

Preset stations and
station names
"Train" Auto PC to
recognize commands
Setting your own
Preset stations
Ways to scan or select
stations
You can establish up to 10 Preset stations for AM and up to 10 Preset
stations for FM.
You can also use your voice to "train" Auto PC to recognize custom voice
commands for your Preset stations. If, for example, you have a favorite
ROCK and CLASSICAL station, you could give them station names such
as ROCK and CLASSICAL.
Once you have selected either AM or FM you will also see the radio
beacon icon and the frequency to which the radio is currently set. The
frequency used in this next example is FM 94.7 (or substitute any working
station in your area) and you will identify this station as Preset 1.
Manual ! !
(Stop your vehicle to do manual steps)
Press lightly once to scan for station 94.7 FM, (easiest) or
Press to incrementally select the specific frequency, 94.7 FM
Press and hold the number "1" on the Key Pad for 2 seconds
Note: The time required for press and hold is customizable; see the
section on Timeouts in the Customize Your Auto PC chapter.
Clarion AutoPC Owner's Manual
37