Clarion AUTOPC 310C Owner's Manual page 17

-Selector
Operation
Manually manipulating
this selector should only
be carried out for so
long as it can be done
safely.
The -Selector enables you to navigate through various Auto PC
functions with a single finger. This is how you do it:
1. Put your index finger on the
raised center element (has a
white dot) of the -selector as
shown in the figure. CAUTION!
DO NOT TAKE YOUR EYES
OFF THE ROAD UNLESS IT IS
SAFE TO DO SO.
2. To select the up/down direction
( ) or the left/right direction (
tilt the -selector in the
corresponding direction.
3. To select "enter" push directly
inward on the middle element
with the white dot ( ).
)
Clarion AutoPC Owner's Manual
5