Clarion AUTOPC 310C Owner's Manual page 51

Setting your own
station names
You can assign station names for your Preset stations using names of
your choice. This next sequence builds upon the Preset 1 station already
established in the earlier example (ROCK = Preset 1 = 94.7 FM).
Manual ! !
Press Start, then
Press MENU then
Press and the display reads "<Record Station Name>"
Press to select the Preset number
Press and display reads "Say Command Word three times at the tone
prompt"--press
Record the Command Word ("ROCK") three times when prompted by
the tone ( )--wait for the "understood" beep ( ) after each repetition
Display reads: "Custom Command successfully recorded" (for 5
seconds) and then "Station name recorded"
to highlight Radio and then
to select Edit Preset Stations
Clarion AutoPC Owner's Manual
39