Canon iP7200 Series Manual page 609

1. Roll up the paper in the opposite direction to the paper curl as shown below.
2. Check that the paper is now flat.
We recommend printing curl-corrected paper one sheet at a time.
Note
Depending on the media type, the paper may be smudged or may not be fed properly even if it is
not curled inward. In such cases, follow the procedure described below to curl the paper outward
within 0.1 inch / 3 mm (B) in height before printing. This may improve the print result.
(C) Printing side
We recommend printing paper that has been curled outward one sheet at a time.
Check 4: Adjust the setting to prevent paper abrasion.
Adjusting the setting to prevent paper abrasion will widen the clearance between the print head and
the loaded paper. If you notice abrasion even with the media type set correctly to match the loaded
paper, set the printer to prevent paper abrasion on the computer.
Print speed may be reduced if you apply the setting to prevent paper abrasion setting.
* Readjust the setting not to prevent paper abrasion once printing is complete. If not, this setting
remains enabled for all subsequent print jobs.
In the Canon IJ Printer Utility, select Custom Settings in the pop-up menu, select the Prevent paper
abrasion check box, and then click Apply.
To open the Canon IJ Printer Utility, see
Check 5: If the intensity is set high, reduce the intensity setting in the
printer driver and try printing again.
If you are using plain paper to print images with high intensity, the paper may absorb too much ink and
become wavy, causing paper abrasion.
Reduce the intensity setting in the printer driver and try printing again.
1.
Open the Print dialog.
How to Open the Printer Driver Setup Window
2.
Select Color Options in the pop-up menu.
Opening the Canon IJ Printer Utility.