Printing Does Not Start - Canon iP7200 Series Manual

Home > Troubleshooting > Problems with Printing
U321

Printing Does Not Start

Check 1: Make sure that the power plug is securely plugged in, then
turn the printer on.
While the POWER lamp is flashing, the printer is initializing. Wait until the POWER lamp stops flashing
and remains lit.
Note
When printing large data such as a photo or graphics, it may take longer to start printing. While
the POWER lamp is flashing, the computer is processing data and sending it to the printer. Wait
until printing starts.
Check 2: Make sure that the printer is connected to your computer
properly.
When the printer is connected to your computer with a USB cable, make sure that the USB cable is
securely plugged in to the printer and the computer, then check the followings:
If you are using a relay device such as a USB hub, disconnect it, connect the printer directly to the
computer, and try printing again. If printing starts normally, there is a problem with the relay
device. Consult the reseller of the relay device for details.
There could also be a problem with the USB cable. Replace the USB cable and try printing again.
When you use the printer over LAN, make sure that the printer is set up to be used over network
correctly.
Check 3: Does an error occur?
Resolve the error according to the number of flashes of the Alarm lamp and the POWER lamp.
Alarm Lamp Flashes Orange
Check 4: If there are any unnecessary print jobs, delete them.
Deleting the Undesired Print Job
Check 5: Make sure that the inner cover (the cover of the disc tray) is
closed.
If the inner cover is opened, close the inner cover and press the RESUME/CANCEL button on the
printer.
Check 6: Make sure that your printer's name is selected in the Print
dialog.
The printer will not print properly if you are using a printer driver for a different printer.
Make sure that your printer's name is selected in Printer in the Print dialog.
Note
To make the printer the one selected by default, select the printer for Default printer.
Check 7: Restart your computer.
> Printing Does Not Start