The Message Is Displayed On The Computer Screen During Setup - Canon iP7200 Series Manual

Home > Troubleshooting > Problems with Network Communication
Message Is Displayed on the Computer Screen During Setup
N043
The Message Is Displayed on the Computer Screen During
Setup
The Enter Password Screen Is Displayed During Setup
The Screen for Setting the Encryption Is Displayed After Selecting the Access Point in the Access
Points Screen
"You are connecting the printer to the non encrypted wireless network" Is Displayed
The Enter Password Screen Is Displayed During Setup
The following screen is displayed if an administrator password is set to the printer which has already
been set up.
Enter the administrator password you have set.
Changing the Settings in the Admin Password Sheet
The Screen for Setting the Encryption Is Displayed After Selecting the Access Point in the
Access Points Screen
This screen is displayed automatically if the selected access point is encrypted. In this case,
configure the details to use the same encryption settings set to the access point.
For information on the encryption settings, see
"You are connecting the printer to the non encrypted wireless network" Is Displayed
Security is not configured on the access point. The printer can still be used, so continue the setup
procedure to complete it.
Important
If you connect to a network that is not protected with security measures, there is a risk of
disclosing data such as your personal information to a third party.
> Other Problems with Network
Changing the Settings in the Wireless LAN
> The
Sheet.
Page top