Canon iP7200 Series Manual page 605

Home > Troubleshooting > Problems with Printing Quality
Is Not Printed
U312
Part of the Page Is Not Printed
Check: When performing automatic duplex printing, the reason below
is possible.
When performing automatic duplex printing, the printable area at the top of the page will be 0.08
inches / 2 mm narrower than the usual.
For this reason, the bottom of the page may not be printed. To prevent this, select the setting to reduce
printing from the printer driver.
Important
Reduced printing may affect the layout depending on your document.
Apply the print setting specified with the application software if the software has a enlarge/reduce
printing function.
1.
Open the Print dialog.
How to Open the Printer Driver Setup Window
2.
Select Duplex Printing & Margin in the pop-up menu.
3.
Select Duplex Printing.
4.
Click Use reduced printing in Print Area.
> Print Results Not Satisfactory > Part of the Page
Page top