Canon iP7200 Series Manual page 60

Press to turn the power on or off.
Turning the Printer On and Off
(7) POWER lamp
Lights white after flashing when the power is turned on.
Note
POWER and Alarm lamps
You can check the status of the printer by the POWER and Alarm lamps.
- POWER lamp is off: The power is off.
- POWER lamp lights white: The printer is ready to print.
- POWER lamp flashes white: The printer is getting ready to print, or printing is in progress.
- Alarm lamp flashes orange: An error has occurred and the printer is not ready to print.
"Alarm Lamp Flashes Orange" in
- POWER lamp flashes white and Alarm lamp flashes orange alternately: An error that
requires contacting the service center may have occurred.
"POWER Lamp Flashes and Alarm Lamp Flashes Orange Alternately" in
Flashes Orange
(8) Alarm lamp
Lights or flashes orange when an error occurs, such as paper-out or ink-out.
(9) RESUME/CANCEL button
Press to cancel a print job in progress. You can press this button to release from printer error
status and resume printing, after the printer problem is resolved.
(10) cassette (lower)
Load A4, B5, A5, or Letter-sized plain paper or photo paper and envelopes into the cassette, and
insert it into the printer. Two or more papers of the same size and media type can be loaded at
the same time, which are fed automatically one sheet at a time.
Loading Large Size Paper
Loading Envelopes
(11) cassette (upper)
Load 4" x 6" (10 x 15 cm) or 5" x 7" (13 x 18 cm) size photo paper into the cassette, and insert it
into the printer. Two or more papers of the same size and media type can be loaded at the same
time, which are fed automatically one sheet at a time.
Loading Small Size Paper
The disc tray can be stored in the back of the cassette (upper).
How to Detach / Attach the Disc Tray
(12) Wi-Fi button/Wi-Fi lamp
Hold down to automatically set up the wireless LAN connection.
Lights or flashes blue to indicate the wireless LAN status.
Lights:
Wireless LAN connection is enabled.
Flashes:
Printing over wireless LAN. While setting up the wireless LAN, the number of flashes indicates
setup status.
Alarm Lamp Flashes Orange
Alarm Lamp
Page top