Connecting The Component Video Input - BenQ SD3742 Quick Start Manual

SD37_TW_EN.book Page 12 Thursday, June 19, 2008 3:20 PM

Connecting the Component Video input

TV game
console
1. Connect the Component Video output of your output equipment (like a TV
game console) to the display's AV1 Y, Cb/Pb and Cr/Pr terminals using a
Component Video cable (not provided). A Component Video cable consists of
three plugs: Green (Y), Blue (Cb/Pb), and Red (Cr/Pr).
2. Connect the Component Video audio output of your output equipment to the
AV1 L (white)/R (red) input terminals on the display using a suitable RCA type
audio cable (not provided).
To view video image from this input, press
Ensure that the colors of the plugs and terminals match when making connection.
For best display results, set the output resolution of the Component Video source
device to 1080p.
This display supports the following Component video input resolutions: 480i, 480p,
576i, 576p, 720p, 1080i and 1080p.
12 Section 1: Quick Start Guide
Audio cable
Component Video cable
INPUT and select AV1 .