Table of Contents
Advertisement
SD37_TW_EN.book Page 6 Thursday, June 19, 2008 3:20 PM
5. Getting to know your display
Front view
No. Name
1
Speakers
2
button
MENU
VOL (Volume) +
3
button
/
CH (Select)
4
button
5
button
INPUT
(Power/
6
button
standby)
7
Power indicator
Remote control
8
sensor window
6
Section 1: Quick Start Guide
1
2
Description
Left and right speakers for reproducing stereo audio.
Displays the OSD (On-Screen Display) menu if not visible,
or exits the current menu if displayed. See
OSD menu" on page
23.
• Adjusts the volume level of the built-in speakers. See
"Adjusting volume" on page
/
-
• In the OSD menu, moves the selection highlight left or
right or changes settings. See
on page
23.
In the OSD menu, moves the selection highlight up or down
or changes settings. See
page
23.
• Cycles through possible input signal sources. See
"Switching inputs" on page
• In the OSD menu, selects the highlighted menu item or
enters a submenu (if available). See
menu" on page
23.
Toggles the display between standby mode and on. See
"Power on, off and standby" on page
• Lights up green when the display is powered on.
• Lights up red when the display is in the standby mode.
• Flashes red when the display is in the power saving mode.
See
"ECO" on page
30.
Receives command signals from the remote control. Do not
obstruct the sensor by placing any objects in front of it,
which will hinder the reception of signals.
3
4
5
6
"Navigating the
19.
"Navigating the OSD menu"
"Navigating the OSD menu" on
19.
"Navigating the OSD
19.
7
8
Advertisement
Chapters
Table of Contents
