Table of Contents
Advertisement
SD37_TW_EN.book Page 33 Thursday, June 19, 2008 3:20 PM
Supported PC (D-Sub/DVI) input signal resolutions
Resolution
720 × 400
31.469
640 × 480
31.469
800 × 600
37.879
1024 × 768
48.363
1280 × 768
47.396
1360 × 768
47.7
1280 × 1024
63.98
1920 × 1080
67.5
• When you connect the display to a PC, you should adjust the resolution in the
display properties of the computer to closely match the native resolution of the
display (for example, 1920 × 1080 @ 60Hz. If necessary, update the driver of the
PC graphic adapter.
• To view the best quality picture when using the PC input, you will then need to
instruct the display to calibrate itself to the PC signal timing. To do so, select
'Auto' in the 'Picture' menu. See
Setting up appropriate output resolution on PC
Before connecting the display to a PC to display PC video, please follow the
instructions below (in Windows XP for example) to setup appropriate output
resolution.
1. On Windows Desktop, right-click and select
that appears.
2. Click the
3. Drag the
"Supported PC (D-Sub/DVI) input signal resolutions" on page
PC supports it, select 1920 × 1080 as the output resolution for the best
result.
4. Click
OK
5. Switch the PC video output from monitor to the display.
6. Press
INPUT
Horizontal
Vertical
Frequency
Frequency
(KHz)
(Hz)
70.08
59.94
60.317
60.00
59.995
60.015
60.02
60
"Auto Adjust" on page
Settings
tab in the window that follows.
Resolution
slider and select a compatible resolution according to
to save the setting and close the window.
on the display and select the
Dot Clock
Frequency
Note
(MHz)
28.322
VGA-T
25.175
VGA
40.00
65.00
79.5
VESA
85.5
108.0
148.5
27.
Properties
from the menu
33. If your
PC
input.
Reference
33
Advertisement
Chapters
Table of Contents
