Table of Contents
Advertisement
Connecting the Component Video input
1. Connect the Component Video output of
your output equipment (like a TV game
console) to the display's AV1 Y, C
C
/P
terminals using a Component Video
R
R
cable (not provided). A Component Video
cable consists of three plugs: Green (Y),
Blue (C
/P
), and Red (C
B
B
2. Connect the Component Video audio
output of your output equipment to the
AV1 L (white)/R (red) input terminals on
the display using a suitable RCA type audio
cable.
To view video image from this input, press
and select
INPUT
AV1
Of the analog video signal types,
Component Video offers the best quality.
Ensure that the colors of the plugs and
terminals match when making connection.
For best display results, set the output
resolution of the Component Video source
device to 720p.
See
"Supported Component Video input
signal resolutions" on page 30
supported resolutions.
Connecting the PC D-Sub input
1. Connect the D-Sub video output of your
PC to the PC D-SUB terminal on the
display using a mini D-Sub (15-pin) cable
(not provided).
2. Connect the audio output of your PC to
the display's PC AUDIO terminal using an
appropriate 3.5mm-diameter Mini-jack
stereo audio cable (not provided).
To view video image from this input, press
and select
INPUT
PC
When you connect the display to a PC, you
should adjust the resolution in the display
properties of the computer to closely
match the native resolution of the display
(for example, 1360 x 768 pixels).
See
"Supported PC (D-Sub/DVI) input
signal resolutions" on page 30
supported resolutions and
appropriate output resolution on PC" on
page 31
on how to set up PC video output.
/P
B
B
/P
).
R
R
.
for
.
on other
"Setting up
and
Audio
cable
Audio
cable
PC
Section 1: Quick Start Guide
Component
Video cable
TV game
console
Mini D-Sub
cable
11
Advertisement
Table of Contents
