Setup Menu - BenQ SD3742 Quick Start Manual

SD37_TW_EN.book Page 30 Thursday, June 19, 2008 3:20 PM

Setup menu

The available menu items are
dependent on the input source
being selected.
The illustration is for reference
only.
Item Function
Select your desired language for the OSD
Language
menu.
Set the Sleep Timer to automatically turn
off the display. 1 minute before
shutdown, a message will display on-
Sleep screen. At this time, if you wish to cancel
the function, press any button on the
Timer
remote control.
Once the time expires, the display will be
put to the standby mode automatically.
Once set to
• When no PC input signal is detected for
5 seconds, the display will activate the
Display Power Management System
(DPMS) and enter power saving mode
ECO
(the power indicator flashes red)
• If no video input signal is detected for 10
minutes, the display will enter standby
mode automatically (the power
indicator lights up red).
Select an input mode according to the
device connected to the HDMI 1 and
HDMI/DVI
HDMI 2/DVI terminals. Select
is connected. If a video device (for
Input
example, a DVD player or TV game
console) is connected, select
Once set to
Blue
detected, a blue screen will be displayed
Screen
automatically.
Reset All
Restore all settings to their default values. Press
Settings
30 OSD (On-Screen Display) menu
Language
Sleep Timer
ECO
HDMI/DVI Input
Blue Screen
Reset All Settings
On
:
PC if a PC
Video .
On , if no input signal is
Setup
English
Off
Off
PC
Off
Operation Range
• English
• 繁中
Off, 15, 30,
45, 60, 90,
120
(minutes)
Press VOL+ or
VOL- to change
• Off
selection.
• On
• PC
• Video
• Off
• On
INPUT to activate the
reset.