Navigating The Osd Menu; Operations In The Osd Menu - BenQ SD3742 Quick Start Manual

SD37_TW_EN.book Page 23 Thursday, June 19, 2008 3:20 PM

Navigating the OSD menu

You can use the On-Screen Display (OSD) menu to adjust the settings on
your display. To display the OSD menu, press

Operations in the OSD menu

For example, to adjust picture sharpness:
1. Press MENU
2. Press VOL (Volume) +
INPUT
3. Press
4. Press CH (Select)
5. Press VOL (Volume) +
6. Press MENU
For details see:
• "Audio menu" on page 24
• "Picture menu" on page 26
• "Senseye menu" on page 29
• "Setup menu" on page 30
Audio Picture Senseye
to display the OSD menu on-screen.
or VOL (Volume) -
to enter the submenu.
or CH (Select)
or VOL (Volume) -
several times to close the OSD menu.
MENU on the display.
TV Setup
• Press VOL (Volume) + ,
CH (Select) or CH (Select)
make selections or change settings.
• Press INPUT to confirm your selection or
enter an submenu (if available).
• Press MENU to return to the previous
menu level, or close the OSD menu.
to select Picture
to select Sharpness .
to make adjustment.
OSD (On-Screen Display) menu
VOL (Volume) - ,
to
.
23