Important Safety Instructions - BenQ SD3742 Quick Start Manual

SD37_TW_EN.book Page 3 Thursday, June 19, 2008 3:20 PM
3.

Important safety instructions

In order to prevent potential dangers and prolong the service life of the
display, please observe the following points when installing, operating and
cleaning the display.
If wall mounting, have a qualified
and experienced technician
mount it safely. Use only a
recommended wall bracket
(optional accessory) for this
display and ensure that the
bracket is securely screw fixed to
the wall structure, and not just
the wall render, lining or
cladding. Do not just glue the
bracket to the wall. Ensure the
bracket is level horizontally.
Do NOT place the display near
water, like a spa or pool, or in a
position which will allow the
splashing or spraying of water
onto the display, like in front of
an open window where rain water
may enter.
Do NOT place the display near or
above sources of heat, such as
radiators, heaters, fuel stoves and
other heat-generating items
(including audio amplifiers).
Otherwise heat may cause
damages to the outer casing as
well as the components inside.
If wall mounting, allow
appropriate space on top for
attaching the display to the wall
bracket.
If recessed into a wall opening,
you must leave appropriate free
space both top and bottom for
mounting and removing the
display.
Do NOT cover or block the vents
and openings while the display is
switched on, as the heat may
accumulate inside the display and
result in danger.
Observe all warnings and
cautions as labelled on the
display.
This display has no power switch.
When installing the display,
incorporate a readily accessible
disconnect device in the fixed
wiring, or connect the power cord
to socket-outlet which must be
provided near the display and
easily accessible. If a fault should
occur during operation of the
unit, operate the disconnect
device to switch the power supply
off, or disconnect the power cord.
Do NOT place the display in
direct sun or where direct sun or
spot lighting will shine onto the
display, as the heat may damage
the display and the bright light
will make viewing the display
more difficult than necessary.
Do NOT place the display on an
uneven, sloping or unstable
surface (such as a trolley) where it
may fall and cause damage to
itself or others. Have a qualified
technician secure the display
where it is placed in case there is
an earthquake.
Do NOT place the display in an
enclosed place without allowing
for ventilation.
All Liquid Crystal Display (LCD)
screens have a very thin protective
layer of glass which is liable to
marking or scratching, and
cracking if struck or pressured.
The liquid crystal substrate is also
liable to damage under excessive
force or extreme temperatures.
Please handle with care.
Section 1: Quick Start Guide 3