Table of Contents
Advertisement
SD37_TW_EN.book Page 15 Thursday, June 19, 2008 3:20 PM
Connecting the HDMI input
Blu-ray disc player
1. Connect the HDMI output of your output equipment (like a Blu-ray disc player)
to the HDMI 1 or HDMI 2/DVI terminal on the display using an HDMI cable
(not provided).
2. Press
INPUT
and switch the input source to
used) or
HDMI2
3. Set the
HDMI/DVI Input
To view video image from this input, press
HDMI (High-Definition Multimedia Interface) is an uncompressed and all-digital
audio/video interface. HDMI provides an interface between any audio/video source,
such as a set-top box, DVD player, or A/V receiver over a single cable. To ensure
the stability and performance of signal transmission, it is recommended that you
use high-quality and certified cable for connection
This display's HDMI input terminals are compliant with the HDMI 1.2 standard, and
support video resolutions up to 1080p. Be aware that HDMI input must be HDCP-
compliant to be displayed.
If you connect this display's HDMI 1 or HDMI 2/DVI terminal to the HDMI output
terminal of a PC, set the HDMI/DVI Input option in the Setup menu of the display to
PC, and it is recommended that you use the PC's audio device to play the audio.
(if the HDMI 2/DVI terminal is used).
option in the
Setup
INPUT
HDMI cable
HDMI1
(if the HDMI 1 terminal is
menu to
Video
(see page
and select
HDMI1
or
HDMI2
Section 1: Quick Start Guide
30).
.
15
Advertisement
Chapters
Table of Contents
