Installation
Location
The 1040 is designed for installation in climate
controlled living spaces when applied with Trane's
ComfortLink™ II zone control system. Place the zone
sensor in a central location with good circulation.
For proper temperature sensing, avoid exposing the
1040 to heat radiated from lamps, sun light, fireplaces
or any other radiant heat source.
Avoid locations close to windows, behind doors or
alcoves with poor air circulation, adjoining outside
walls, or doors that lead to the outside.
Select a location that prevents the 1040 from being
directly exposed to air currents from supply registers or
ceiling fans.
page 15
page 15
Correct
Celing
Placement
2 FEET
Optimum
Zone
Window
5 FEET
Vent
Floor
Natural heat dissipation
from the Touch Screen
Zone
Sensor
Onboard
Thermistor
Sensor
Installation Figure 1
TZON1040 Installation and User Guide