Receiving Camera Images via LAN
The images distributed using this function can be received using the Windows Media Player.
1.
Set STREAM TYPE in the ENCODE SETUP menu to "for
WMP".
2.
Open Windows Media Player.
3.
Select [File] [Open URL].
The following dialog box will appear.
4.
Set the IP address of the camera.
http://***.***.***.***:####/asf
*
IP address of camera
#
HTTP Port number set in "for Media player"
5.
When completed with setting, select OK to establish connec-
tion.
Using the Windows
Receiving Camera Images via LAN
Media Player
The images distributed using this function can be received using the QuickTime Player.
Memo
Memo
• WMP for Mac OS is not supported.
Use QuickTime Player.
☞
(
page 72)
70
1.
Set STREAM TYPE in the ENCODE SETUP menu to "for QT".
2.
Open Quick Time Player
3.
Select [File] [Open URL with New Player].
The following dialog box will appear.
4.
Set the IP address of the camera.
rtsp://***.***.***.***/live.mp4
*
IP address of camera
5.
When completed with setting, select OK to establish connec-
tion.
Using QuickTime Player
Memo
Memo
• When quickly alternating Play and
Still operations on QuickTime, a
455 error dialog may appear. In this
case, turn off the GY-DV300 and
turn the power back on.
• When repeating Open and Close
operations on the QuickTime
Player, there may be a lag between
the audio and video. In this case,
restart QuickTime.
• If there is a lag between the video
and audio, set the sampling fre-
quency of input signals and the au-
dio mode of GY-DV300 to match,
close QuickTime and launch again.
71