Preparations And Main Functions Camera Cable Length Setup - JVC RM-HP250DE Instructions Manual

Preparations and Main Functions
Camera Cable Length Setup
Cable length setup is required when a camera is connected to the RM-HP250 for the first time or
when the camera cable length is changed. The cable length setup value is stored in the memory
inside the RM-HP250 and is held even after it is turned OFF.
FULL AUTO F1
SHUTTER
2. CABLE
BARS
F2
GAIN
M
LCD display
Cursor
1.
1: GENLOCK
2: CABLE
Cursor
2.
2A: LENGTH
3.
2A: LENGTH
4.
2A: LENGTH
12
MENU/SHUTTER GAIN
F3 P
STEP
HIGH
MID
SHUTTER VARIABLE
PUSH-ON PUSH-ON
R
F4 MENU
LOW
DOWN UP DOWN UP
Control knob
MENU button
5M
Setting
5M
100M
1.
Press and hold the MENU button for about 1 second until
the LCD display shows the menu display. Turn the con-
trol knob to move the cursor ( ) to "2: CABLE".
2.
Press the control knob to display "2A: LENGTH".
Setting the cable length
3.
Press the control knob to move the cursor ( ) to the cur-
rently set length.
4.
Turn the control knob to select the cable length that is to
be used in meters (variable to 5M, 20M, 50M or 100M).
5.
After setting the value, press the control knob to move the
cursor ( ) back to "2A: LENGTH".