Playback - JVC KA-DV350U Instructions Manual

Using the CF
(Compact Flash)
When simultaneously recording the camera image to a DV cassette and CF card, recording event will be registered to
the clip list of the CF card each time recording is performed. The clip list is stored with the recorded event number (clip
number) and the date/time when the recording was started. All events (clip numbers) can be played back on the MOVIE
CLIP screen.
Memo Memo
• MOVIE CLIP will not appear
during card initialization (flashing
display).
• When a MOVIE CLIP menu item
is selected and the SELECT dial
is pressed with no clips recorded
on the CF card, "NO CLIP!" will
flash for about 3 seconds.
• If there is no CF card inserted,
"NO CF CARD!" will flash for 1.
Turn on the GY-DV300 power.
about 3 seconds.
Check to see that the
viewfinder screen. (When the power is turned on,
will flash during initialization.)
2.
Set the MODE switch to "VTR".
3.
Make sure GY-DV300 is not in operation.
TOP MENU screen
4.
Display the MOVIE CLIP screen.
• Press the MENU button to display the TOP MENU screen.
MEN U
V T R S E T . .
• Turn the SELECT dial, move the cursor ( ) to MOVIE CLIP
S Y S T EM S E T . .
D I S PL AY S E T . .
C L OC K / T C . .
MENU A L L R E SE T C ANC E L
N E TWOR K P A C K CONF I G . . • The movie clip list of the latest clip page recorded on the CF
MO V I E C L I P . .
E X I T
Clip number
CLIP FUNCTION screen
M O V I E C I P L
mc 0 0 8 . 0 a s f R / W
R E V I E W
5.
D E LE T E
Select the clip to play back.
P ROT E C T
PAGE B ACK
• Turn the SELECT dial and move the cursor ( ) to the clip to
• Turning the SELECT dial up scrolls to the page with smaller
Selected clip number
• Turning the SELECT dial down scrolls to the page with larger
Still image (starting point)
of the selected clip
• Press the [FWD] button to scroll to the next page. Press the
• Press and hold the [FWD] button for about 2 seconds to
• Press and hold the [REV] button for about 2 seconds to scroll
6.
Press the SELECT dial.
Card
POWER switch
POWER
MODE switch
OFF ON
MODE
MENU CAM-B
CAM-A VTR
button
GAIN
SHUTTER
BAR
MENU
SELECT
AW
dial
FWD
FWD
button
REV
REV
button
<GY-DV300 rear panel>
C F display appears on the LCD screen/
display
and press the SELECT dial.
card and the still image (starting point) of the latest clip num-
ber appear by overlapping.
MOVIE CLIP screen
The clip page in
M O V I E C I P L
the MOVIE CLIP
mc 0 0 5 . 0 a s f R / W
02 03 / / 02 09 0 0 : : 00 screen displays 4
Date/time
mc 0 0 6 . 0 a s f R / W
lists per page.
02 03 / / 02 09 3 0 : : 25
0 0 7 .
mc 0 a s f R / W
02 03 / / 02 10 1 0 : : 55
Cursor
mc 0 0 8 .
0 a s f R / W
Latest clip
02 03 / / 02 11 0 0 : : 00
PAGE B ACK
play back.
(older) clip numbers.
(newer) clip numbers.
[REV] button to scroll to the previous page.
scroll to the page with the newest clip.
to the page with the oldest clip.
CLIP FUNCTION screen of the selected clip appears.
• Still image (starting point) of the selected clip appears.
OVER
Using the CF

Playback

CLIP FUNCTION screen
R E V I E W
D E LE T E
P ROT E C T
PAGE B ACK
REVIEW
PLAY MODE screen
P L A Y
PAGE B ACK
52
Card
(Compact Flash)
7.
Play back the clip.
Turn the SELECT dial, move the cursor to REVIEW and press
M O V I E C I P L
mc 0 0 8 . 0 a s f R / W
the SELECT dial.
• The movie clip is played back after the clip number flashes.
The value of the recorded frame size (320 × 240 or 160 ×
120) appears during displaying the still image. The value of
the recorded max. bit rate appears during playback.
8.
To pause playback, press the BAR ( / ) button.
• To resume playback, press the BAR ( / ) button once more.
PAGE BACK
The following operations are performed when the playback
of the selected clip ends. (when the PLAY MODE item is set
M O V I E C I P L
mc 0 0 8 . 0 a s f R / W
to OFF.)
• When there are no following clips, the unit pauses at the
beginning of the current clip.
• If following clips exist, the clip number. flashes and then
playback is performed.
8 5 k
• Selecting PAGE BACK during playback or pausing and press
the SELECT dial will return to the MOVIE CLIP screen.
The BIT RATE
used for recording
is displayed.
Memo Memo
• The video encoded by the KA-DV350 is so designed that it is displayed in
a correct aspect ratio by personal computer monitor. When the CF played-
back video is viewed by video-out connector output of the GY-DV300 or
observed on a LCD screen, the aspect ratio may look different. This is
because a simple output is made on the video for a personal computer and
is therefore normal and not a malfunction.
• When PLAY MODE in the MOVIE CLIP SETUP screen is set to
"REPEAT", repeat playback is performed. (
• This feature is for the easy checking of MOVIE CLIP contents. Although
video or audio may stop during the middle of playback depending on the
operational environment, this is not caused by an abnormality in the
MOVIE CLIP itself. After checking, playback the MOVIE CLIP with the
viewer software for the used environment (such as Streamproducer,
Windows Media Player, etc.).
Playback
☞
page 20)
53