Balancing Camera And Lens; Camera And Len - JVC DPT 115 Operation Manual

6.5

BALANCING CAMERA AND LENS

1. Place the camera/lens/adapter plate on a flat surface. Place a pencil or other small round
cylindrical item under the teleconferencing lens adapter plate as shown.
2. Move the camera/lens/adapter plate laterally, both left and right to determine the balance point
of the assembly. This the point at which the assembly would rock easily on the pencil resembling
a seesaw for children.
3. Using a small piece of masking tape or "post it note" mark the balance or pivot point on the
lens.
4. Remove the pencil or pivot item.
BALANCE POINT
JVC 3-CCD
PENCIL
23
2/12/05
Document D0153