Confirming Correct Attachment; Installing Streamproducer - JVC KA-DV350U Instructions Manual

Confirming correct attachment

Use the following procedure to confirm that the KA-DV350 is correctly attached.
Memo Memo
The card status indicator
shown on the right blinks
d u r i n g t h e i n i t i a l i z a t i o n
operation right after the power
is turned on.
10
1.
Turn OFF the power of the
GY-DV300.
2.
Insert the card.
3.
Turn ON the power of the
GY-DV300.
4.
Confirm the card status indi-
cator.
The card status indicator is
displayed on the GY-DV300's
LCD screen or viewfinder
screen in accordance with
the type of the card.
e Card status
indicator
: Card not inserted
e
: LAN card
C F
: CF card
Caution
Be sure to turn OFF the GY-DV300's
power supply before the card is
removed from the camcorder.

Installing Streamproducer

Click
Memo Memo
• When installing the Streamproducer, make sure
that login is made to a PC with "Administrator
privileges".
• Detailed information on how to operate the
Streamproducer is described in the "Read
User's Guide", so please refer to this.
The "Read User 's Guide" can be opened by
s e l e c t i n g : S t a r t m e n u / P r o g r a m s /
Streamproducer/User 's Guide.
• There are no descriptions referring to the KA-
DV350 in the Streamproducer "Read User's
Guide". However, all of the instructions that are
required for the KA-DV350 are the same as
those for the KA-DV300.
1.
I n s e r t t h e C D - R O M o f
Streamproducer into the
CD-ROM drive.
• Wait until the access lamp of
the CD-ROM drive goes out.
• The screen shown on the
left appears.
•In case the Streamproducer
does not start automatically,
execute the "autorun.exe" in
the CD-ROM.
2.
Click on "English".
The screen shown on the left
appears.
3.
Click on "Install the
Click
Streamproducer".
The Installer starts up.
11