Function Of Simplified Viewer - JVC KA-DV350U Instructions Manual

Function of Simplified Viewer

Click the characters "STREAMCAPTURE" on the left of the Streamcorder screen to display the Streamcapture screen
as shown below. Video and audio sent from KA-DV350 via LAN can be played back on your PC in the Streamcapture
screen or data can be saved to files. It can be used on a PC that has Streamproducer installed.
Name of buttons and their function
Video display Operation buttons
The display size can be changed Clicking will start operation. When on, the button will light.
in the Property dialog box.
VIEW :
☞
( page 69)
Click to play back or stop video/audio from KA-DV350 on
your PC. (ON when the Streamcapture screen is opened.)
Status/Time elapsed display
The current status is displayed. CAPTURE
Click to save video/audio to a PC.
VIEWING:
Default destination
Video or audio from KA-DV350
My Document¥Streamcorder (¥IPAddress)
is being played back in realtime
Saved file name:
(live display).
The file name based on the capture start time
CAPTURING:
will be used.
Video or audio is being saved in
0 4 0 1 0 2 – 1 5 3 0 0 0 .asf
your PC.
STOP:
Year Month Day
Playback is stopped.
CAPTURE-TRIG. :
WAITING:
C l i c k w h e n s a v i n g t h e v i d e o / a u d i o f r o m
TRIG recording standby.
KA-DV350 to your PC when starting recording
with GY-DV300. (☞ page 73)
Clicking the button will display
CAST-CAM :
the Property dialog box.
Click when sending the video/audio from
Video display size and the save
KA-DV350 to another PC. (☞ page 70)
d e s t i n a t i o n f o l d e r c a n b e
☞
CAST-BARS :
changed. ( page 69)
Click when transmitting color bars rather than video
from KA-DV350. (Video from KA-DV350 will be dis-
played in the video display of the Streamcapture
screen. Color bars will not be displayed.)
CAST-TRIG. :
Click when sending the video/audio from KA-DV350
to another PC when starting recording with GY-
DV300. (☞ page 73)
MUTE :
Click to turn on/off the mute setting.
When on, the playback sound will be muted.
Memo Memo
• Since video on the STREAM CAP-
TURE screen is converted video
data, images will take more time to
appear than the actual video taken
with GY-DV300.
• Set the stream type to "for WMP".
☞
( page 19)
• Click the CAPTURE button after
the image is displayed on the
screen.
• Depending on the network or op-
erational environment, network
connection may be disconnected.
Since Streamcapture is for the easy
checking of streaming data on the
We b , i t i s n o t b u i l t w i t h a
reconnection feature.
reconnection is required, please
use Streamproducer.
Hour Minute Second
Function of Simplified Viewer
Click on the [PROP] button in the Streamcapturer window to display the setup display ([Properties] dialog box).
Setup for a simplefied viewer (Streamcapture)
Property dialog box
Confirm the setting Cancel the setting
value by clicking value by clicking
this button. this button.
Select the video display size
Select the display size from the pull-down menu.
Setting range:
• Real size
When
• Fit to window
Save destination folder
The default save destination is as follows:
Set this field when changing the save destination
folder.
My Document¥Streamcorder (¥IPAddress)
When changing the destination folder, press the
Browse... button and select the desired folder. The
changed destination folder will be the default folder
for future save operations.
Advanced settings dialog box
Port numbers of the network used on the PC side dur-
ing communication with the network pack are set.
RTSP port:
used for handling commands. [TCP]
RTP port:
used for receiving video data. [UDP]
OK button:
To confirm the settings and close the dialog box.
Cancel button:
To cancel the settings and close the dialog box.
Normally, available ports are automatically searched
and set.
If there are restrictions to the port numbers due to
the LAN environment settings of your PC, consult your
network administrator.
When specifying the port numbers for use, check each
checkbox and input the number in the edit box on the
right.
68
It displays the
information version of
the Streamcapture.
Advanced settings dialog box
HTTP port
Port number of the network used when sending
video/audio is set. Normally, no user setting is re-
quired.
Max clients
Sent video/audio can be received up to the number
specified in this dialog box.
Internet/LAN URL
When receiving video/audio, the URL displayed here
in entered in Windows Media Player.
Copy Internet URL
Copies Internet URL to clipboard.
Select each URL and right click on that URL, then
appear the copy message.
Copy LAN URL
Copies LAN URL to clipboard.
Select each URL and right click on that URL, then
appear the copy message.
OK button
To confirm the settings and close the dialog box.
Cancel button
To cancel the settings and close the dialog box.
69