Table of Contents
Advertisement
4. If you are connecting the PC directly to a streamcorder, remove the check mark on the [Use a proxy
server for your LAN] box if it is checked.
5. If you are connecting to a streamcorder using a LAN that requires a proxy server, check on the [Use a
proxy server for your LAN] box and type the address of the proxy server. Check on the [Bypass proxy
server for local addresses] box and click [Advanced...] button to open the [Proxy Settings] dialog box.
6. Type the IP address of the streamcorder in the blank area of the [Do not use proxy server for
addresses beginning with:]. window. You do not need to enter the entire address, just the first two
numbers, followed by '.*.*' as shown here Click the [OK] button after you have completed the proxy
settings.
3.3 Uninstall Streamproducer
Note: In uninstallation of a program Administrator authority is required.
You can uninstall Streamproducer using one of the following two ways.
3.3.1 Using Streamproducer
CD-ROM..
Insert the Streamproducer CD-ROM in CD-ROM drive. If your computer is configured to autorun from
CD-ROM, the first setup screens appear. If these screens do not automatically appear, from the
Windows "Start" menu, select "Run" and run 'Startup.exe' from the CD drive.
Choose [English] as the language and click on [Install the Streamproducer].
Since the installation program will find an instance of Streamproducer already installed, you will be
prompted if you would like to remove it. Click 'OK' to remove Streamproducer.
3.3.2 Using "Add/Remove
Programs"..
From the Widows desktop, open 'My Computer'. Open 'Control Panel' and choose [Add/Remove
Programs].
Click [Streamproducer] on the list of Currently installed Programs and click [Remove] button. A
message for confirmation of removing Streamproducer appears.
Click [OK] to remove Streamproducer.
9
4. Running Streamproducer
From the Windows [Start] menu, choose [Programs], [JVC], [Streamproducer], Streamproducer. The main
window, shown here, appears.
Video
display
windows
The Streamproducer desktop has three areas; one for each function:
[Video display windows] These four windows can display saved contents from files or images from
streamcorders. Four windows can be shown maximally. See Section 6.2 "Option Dialog" for
information about setting of the number of the Video display windows. Until a file is selected or a
streamcorder is connected, the video display window will be blank.
[Casting monitor window] This window shows a preview of the video casting image.
[Information window] This window, with three specific function tabs, shows information about the
system condition and casting. See Section 6.1 "Information window" for information about the
information presented in these windows.
4.1 Closing Streamproducer
Choose [Exit] from [File] menu of Streamproducer to close, or click on the X icon on the upper right hand corner.
If you have not already disconnected from any connected streamcorders, you will be prompted to disconnect
now and close Streamproducer.
Casting
monitor
window
Information
window
10
Advertisement
Chapters
Table of Contents
