Overview; Introduction; Figure 1-1: Neutrino-430 Enb; Figure 1-2: Network Structure - Baicells Neutrino-430 Installation Manual

Overview

1

1.1 Introduction

The Baicells Neutrino-430 (Figure 1-1) is an advanced two-carrier indoor eNodeB that is
compliant with 3GPP on LTE TDD technology. This 4x250mW eNodeB is capable of operating in
Carrier Aggregation (CA) mode or Dual Carrier (DC) split mode. It supports broadband data
access, providing various data service transformation and transmission to realize the indoor
wireless coverage. It can be used by telecom operators and broadband operators to improve
capacity and throughput while eliminating existing dead zones.

Figure 1-1: Neutrino-430 eNB

The network structure of the Neutrino-430 is shown in Figure 1-2.

Figure 1-2: Network Structure

As a two-carrier eNB, the Neutrino-430 hardware unit contains two separate eNBs inside one
shell. Having two carriers provides versatile options in how you operate the eNB. The available
operating modes are described in the next section, Features.
The Neutrino-430's primary cell (Pcell) is referred to as Cell 1. The secondary cell (Scell) is
referred to as Cell 2. Each eNB comes pre-configured to simplify the installation. Baicells
provides operators with local and Web-based Graphical User Interface (GUI) software
applications to configure and manage individual eNBs and Customer Premise Equipment (CPE).
6