Table of Contents
Advertisement
Figure 3-19: Carrier Setting
3.5.7 Verify eNB Operational Status
Once the basic configuration settings have been saved, you need to reboot the eNB. When the
eNB is finished rebooting, check the eNB status using the eNB GUI and the OMC:
eNB GUI: Go to BTS Info > Basic Info and check the Cell Status field (Figure 3-20). It
•
should show Active. Also, check that GPS Sync is reported as Synchronized.
OMC: Go to eNB > Monitor to see if the Active Status shows Active and the Sync Status
•
shows GPS Synchronized (Figure 3-21).
NOTE: Once the eNB is mounted at its intended destination and powered on, check
the status settings.
25
Advertisement
Table of Contents
