Figure 3-6: PWR Power Supply, OPT Backhaul Configuration
3.3.2 PWR Power Supply, WAN/PoE+ Backhaul Configuration:
Connect the cables for the PWR power supply, WAN/PoE+ backhaul configuration, as shown
in the following steps. Refer to Figure 3-7:
1. Connect the AC power supply to the power (PWR) interface on the eNB and the other
end to a power outlet.
2. Connect the Ethernet cable to the WAN/PoE port on the eNB.
3. Connect the other end of the Ethernet cable to the Ethernet port on the Ethernet
switch.
Figure 3-7: PWR Power Supply, WAN/PoE+ Backhaul Configuration
14