Table of Contents
Advertisement
Field Name
First Address
Last Address
IMSI to IP Binding - IMSI If LGW Mode = Router and Static Address = ON (Figure 3-15), if you want
IMSI to IP Binding - IP
Figure 3-15 LGW = Router
3.5.3.3 Static Routing
When using static routing, go to Network > Static Routing to view the configured static route
information (Figure 3-16). To edit or enable/disable a static route in the list, click on the
icon, enter the information, and save. Field descriptions are in Table 3-3.
Figure 3-16: Static Routing
Description
If LGW Mode = Router and Static Address = ON (Figure 3-15), enter the first
static IP address in the range.
If LGW Mode = Router and Static Address = ON (Figure 3-15), enter the first
static IP address in the range.
to bind an IMSI number to the IP address, enter the IMSI number.
If LGW Mode = Router and Static Address = ON (Figure 3-15), enter the IP
address to bind to the IMSI. You can add more than one IP address.
21
Advertisement
Table of Contents
