Sony BVP-E10 Series Product Information Manual page 92

7
Chapter 7 Location and Function of Parts and Controls
92
BVP-E10 Series Product Information Manual
If Auto Iris is kept ON, the skin tone auto iris will
start functioning when the subject for reference
is resumed.
For the skin tone auto iris, refer to the system
manual.
D Iris control
When the AUTO button is not lit, you can adjust
the iris manually by turning the control. The
adjustment value is displayed in f numbers on
the display. When the AUTO button is lit, the
reference value for automatic iris adjustment
can be set in a range of ± 2f stops with this
control, to allow manual trimming of the
automatic exposure.
r r MASTER BLACK control block r r
Turn the control to adjust the master black level. The
adjustment value is displayed in the display window.
s Camera number/tally indication window s
s s
The number of the camera being controlled from this
unit is displayed in orange. When a red tally signal is
sent to the camera, the number is displayed in black
and the background of the number illuminates in red.
When a green tally signal is sent to the camera, the
number is displayed in black and the background of
the number illuminates in green. When both the red
and green tally signals are simultaneously sent, the left
half of the background illuminates in red and the right
half illuminates in green.