To Set The Screen Saver - Sony BVP-E10 Series Product Information Manual

The lower half of the display becomes the LED Display
Brightness adjustment display.
Clear
LED
Buzzer EL Bright
Bright
LED Display Brightness
Level
50
3.
Adjust the brightness with the leftmost control knob.
When the adjustment is completed
Press [Home] to return to the MSU adjustment menu,
and press [Exit] to leave this menu.
8-1-4-9

To set the screen saver

The screen saver can be activated to protect the menu
display when the MSU-700A/750 is not operated for a
certain time. The screen saver can be turned on and
off as required, and the time to activate it can be
adjusted. To set the screen saver, proceed as follows.
1.
Press [MSU SW Set] on the MSU Configuration
menu.
The MSU SW Setting display appears.
MSU SW Setting
PIX/WF PIX/WF
PIX/WF Control
Syncro All Mode
ON ON Direct
Screen Saver
Test SW Mode
Wait
Time
Saw
5
ON
[min]
Screen saver setting area
Note
The Test SW Mode Setting area is displayed with
the MSU-750 only.
2.
Press [ON] to set it to inverse video to activate the
screen saver.
3.
When the screen saver is turned on, set the wait
time (in units of minutes) until it activates by
pressing f or F.
When the adjustment is completed
Press [Exit] to leave this menu.
Home
1
1
LED Disp
Bright
Exit
Mode
Alter-
nate
3 Step 10 Step
Chapter 8 Menu Settings
BVP-E10 Series Product Information Manual
127