Sony BVP-E10 Series Product Information Manual page 108

7
Chapter 7 Location and Function of Parts and Controls
108
BVP-E10 Series Product Information Manual
g CLOSE button g
g g
Press and light the button to close the iris. To release
the close mode, press the button again so that it goes
dark.
h VTR START/STOP button. h h h
(Note these functions are designed for operation with
camcorders. They can only be used with the BVP-E10
series when docked with a DNV-5 recorder
Press and light up this button to start a recording
operation. When you press the button when lit, it goes
dark, and recording stops. Using the RM Configuration
menu under the Maintenance menu, you can assign
the CALL button function to this button. In this case,
press to send a call signal to the video camera, on
which the CALL button illuminates. The tally lamps on
the camera and the red tally lamp on the camera
control unit light when not lit, or go dark when lit. When
the CALL button on the video camera is pressed, the
button on this unit illuminates and a buzzer sounds.
i VTR playback control buttons i
i i
Controls VTR playback operations.
s (stop) button
Press to stop a rewind, fast-forward or playback
operation.
j (rewind) button
MONITOR
FUNCTION
VF DISP
MAINTENANCE
VF MENU
SCENE
CANCEL
PAINT
ENTER
A RM menu select/camera menu set buttons
MONITOR: When this button is unlit, you can
select the menus of this unit using the other
buttons (RM Menu mode in which the
functions indicated on the panel with white
characters for the buttons are valid). Press
and light this button to display the video
signal from the connected camera on the
LCD. This also permits the menus of the
camera to be operated from this unit (the
functions indicated on the panel with blue
characters for the buttons and the leftmost
control knob are valid).
FUNCTION/VF DISP (viewfinder display):
With the MONITOR button unlit, the Function
menu of this unit appears on the LCD when
you press and light this button. With the
MONITOR button lit, the character display of
the camera is turned on when you press and
light this button.
Press and light this button to start a rewind
operation.
H(play) button
Press and light this button to start a playback
operation.
J(fast forward) button
Press and light this button to start a fast-forward
operation.
7(recording review) button
Press and light this button to execute a recording
review operation.
Notes:
• When the VTR START/STOP button is lit, these
buttons are deactivated. To activate the buttons, first
press the VTR START/STOP button to cancel
Recording mode.
• A part of the VTR control functions of this unit may be
disabled depending on the combination of camera
and VTR. For details, ask your Sony dealer.
j j j j ALARM indicator
Flashes or illuminates red when the self-diagnostic
function identifies a problem in the camera or CCU
system .
k k Menu operation block
k k
1 RM menu select/camera menu set buttons
2 LCD/touch panel
MENU SELECT
3Control knobs
MAINTENANCE/VF MENU (viewfinder menu):
SCENE/CANCEL: With the MONITOR button
PAINT/ENTER: With the MONITOR button unlit,
With the MONITOR button unlit, the
Maintenance menu of this unit appears on the
LCD when you press and light this button.
With the MONITOR button lit, the unit enters
Camera Menu mode when you press and light
this button. The main menu of the camera
appears on the LCD.
unlit, the Scene File menu of this unit appears
on the LCD when you press and light this
button. With the MONITOR button lit, you can
cancel the setting of the camera menu item
selected on the LCD by pressing this button.
the Paint menu of this unit appears on the
LCD when you press and light this button.
With the MONITOR button lit, you can register
the setting of the camera menu item selected
on the LCD by pressing this button. When
none of the buttons are lit, the status display
is obtained.