Table of Contents
Advertisement
n Menu operation block
n
n
n
1
MODE
MULTI
CARD
CONFIG
MAINTENANCE
FILE
PAINT FUNCTION
A MODE (mode select) buttons
Select the menu mode. If you press and light
one of these buttons, the menu for the selected
mode appears on the EL display. When the lit
button is pressed again, it goes dark and the
menu on the display also disappears.
MULTI: Selects Multi-Control menu to set the
requirements for Master/Slave mode to set up
multiple cameras in synchronization.
CARD: Selects IC memory card menu to
initialize IC cards.
CONFIG: Selects Configuration menu to
configure this unit and the entire camera
system.
MAINTENANCE: Maintenance mode to set
various camera maintenance items and the H
and SC phases of CCU, etc.
FILE: Selects File operation menu to retrieve
and transfer reference files, lens files and
scene files in the video camera or on IC
cards.
PAINT: Selects Paint control menu to adjust
various paint items, such as white, black and
flare.
FUNCTION: Selects Function menu to control
various camera and CCU functions.
B EL display/touch panel
Displays the menu selected with the MODE
buttons and permits the displayed items to be
adjusted.
C Control knobs (rotary encoders)
Adjust the selected items on the touch panel.
o
o CALL button
o
o
Press to send a call signal to the selected video
camera,. The tally lamps on the camera and the red
tally lamp on the CCU light(or go off if already lit). When
the CALL button on the video camera is pressed, the
CALL button on this unit illuminates and a buzzer
sounds.
p IRIS/MB ACTIVE (iris/master black active)
p
p
p
button
Press and light up this button to enable the iris and
master black adjustment functions of the unit. When
the PANEL ACTIVE button is pressed, this button
automatically illuminates. To disable only the iris/
2
3
master black control block of the panel, press this
button so that it goes dark.
q Iris control block
q
q
q
1
2
EXT
4
A EXT (lens extender) indicator
Illuminates when the lens extender is used.
B Iris display window
The iris value is displayed in f numbers. When
the iris is closed, "CL" is displayed in the
window.
C AUTO button
Press and light the button to automatically adjust
the iris according to the brightness of the
subject (Auto Iris).
When this button is lit, the reference value for
automatic iris adjustment can be set in a range
of ± 2f with the iris control. If you press the
button when lit, it goes dark and manual iris
adjustment is enabled.
Note
If the the skin tone auto iris function is used and
the subject being used as the reference for
automatic adjustment is lost , the skin tone auto
iris stops functioning, and the iris value at that
time is maintained. The AUTO button then
flashes. In this condition, not only is the iris not
automatically adjusted but also it cannot be
changed manually. When you wish to change
the iris, turn Auto Iris off.
Chapter 7 Location and Function of Parts and Controls
BVP-E10 Series Product Information Manual
3
AUTO
IRIS
91
Advertisement
Table of Contents
