4. Pull the storage column toward the front of the library ( 1 in Figure 8-109) to
Figure 8-109. Removing a storage column
5. Pull the column straight out of the side wall of thechassis.
6. Repeat this procedure for each column.
Replacing a Storage Column
1
7
Figure 8-110. Correct fiducial placement
Important: Remember the order in which the columns were removed. Replace
the columns in their original location.
disengage the locking tabs on the back of the column.
1
2
3
8
9
Control module/left front
1
column
4
10
7
Expansion module/left front column
Chapter 8. Add, Check, Adjust, Remove, and Replace Procedures
5
6
11
12
8-97