T002: Put Operation Failed, Final Cartridge Position Unknown, Motion Ok - IBM TS3310 Maintenance Information

System storage tape library
Hide thumbs Also See for TS3310:
Table of Contents

Advertisement

Root Causes
Possible CRU Replacements
Possible FRU Replacements
Resolution
T002: PUT Operation Failed, Final Cartridge Position
Unknown, Motion OK
Description
Detection Scenarios
Root Causes
Possible CRU Replacements
Possible FRU Replacements
Resolution
6-2
TS3310 Tape Library Maintenance Information
1. Operator did not recover cartridge.
2. Operator put a cartridge in the Picker.
3. Power loss during a move with media and the library logic cannot
legitimately return it to the proper cell.
4. Physical contamination such as dust and debris on the sensor gives a
"false full state".
5. Various electrical failures.
v Tape Cartridge
v Library Control Blade
v Picker Assembly
v Y-axis Cable Spool
v Internal Cables and Boards Kit
Perform "DR001: Resolve Picker Cartridge Presence" on page 6-60.
GUI Description: The robot failed to place a tape cartridge and cartridge
recovery is required.
Explanation: The library cannot successfully put a tape into a drive, storage
slot, or I/O station and the final "resting place" of the tape is unknown.
There are no additional recovery logic paths to be exercised. Fundamental
servo control seems OK. If the operation was initiated by a host move media,
the move media command has failed with a SK/ASC/ASCQ 4h/15h/01h
(hardware mechanical positioning error).
PUT is not successful, PUT recovery is not successful, and a cartridge is not
known to be properly seated in the Picker or a storage slot.
1. Magazine is damaged.
2. Magazine is the wrong type for the cartridge.
3. A storage cell is blocked by foreign material or not clipped in and seated
correctly.
4. Calibration problem resulted in improper Picker position.
5. Picker offset problem.
6. Cartridge is damaged.
7. Unlabeled cartridge or intermittently readable cartridge label in
destination slot.
8. Drive load mechanism is not working.
9. A variety of Picker problems such as slipping gears, encoder issues, etc.
v Tape Cartridge
v Library Control Blade
v Picker Assembly
v Y-axis Cable Spool
v Internal Cables and Boards Kit
Perform "DR002: Resolve Tape Cartridge Recovery" on page 6-60.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents