Table of Contents
Advertisement
• Advanced Features
User Name
You may program a user name to display on the LCD when the PS6 is idle.
1. When the Portable Station is idle, press [Menu] [5][7] to display the User
Name menu.
2. Press [Menu].
3. The currently registered user name will be displayed. Use [* <] or [# >] to
move the cursor and enter a new name.
4. Press [Menu]. You will hear a confirmation tone to indicate that the
registration has been successfully made. The Portable Station goes back to
the idle state.
NOTES:
• The registered user name is displayed on the middle line when the Portable
Station is idle.
• The display function of the key service unit overrides the display.
• The user name may be up to 12 characters in length.
Volume Controls
During a conversation, you can press the up arrow to increase the volume of the
receiver or the down arrow to decrease the volume of the receiver.
If you are using the speakerphone feature, you can adjust the speaker volume in
the same manner, using the arrow keys.
The ringer volume is controlled using the arrow keys, as described previously,
but the phone must be idle or receiving a call before you can adjust the Ringer
Volume. If you have turned the Ringer Volume completely off, your portable
unit will display 'S' for Silent on the LCD display.
58 • Omegatrek Owner's Manual
Advertisement
Table of Contents
