Signal Strength; Clock And Calendar - Iwatsu Omegatrek PS6 Owner's Manual

• Getting Started
When the Battery icon is fully charged, the icon will display two bars within the
Battery icon. As the charge decreases, so will the number of visible bars within
the Battery icon.When your battery charge level has become too low, the
Battery icon will be empty. Place the Portable Station in the charger as soon as
possible.

Signal Strength

The Antenna icon indicates that the Portable Station can communicate with the
base station. The strength of the signal, which enables the Portable Station to
communicate, can vary with differing circumstances.
You can always determine your signal strength by the number of bars located
next to the Antenna icon on your LCD Display.
The maximum number of bars reflecting signal strength is three. When all three
bars are present, you have a strong signal and your Portable Station should
function normally both making and receiving calls. As the number of bars
decreases, so does your signal strength. If no bars are present, you may not be
able to place or receive calls. Try moving to a new location or extend the
antenna on your phone to increase your signal strength.

Clock and Calendar

The system clock information will automatically display on your Portable
Station. However, you can also program clock and calendar yourself:
1. When the Portable Station is idle, press [Menu] [5] [1]. Your LCD Display
(see LCD Display) will show TIME mode and prompt you to press
'MENU TO PROG'.
2. Press [MENU] to begin programming the time into your portable unit.
3. Enter the correct information in the spaces provided, using the keypad.
Notice that to set the time you must also set the date. A cursor will blink
over the current digit to be modified. Enter digits to make changes. If you
do NOT wish to change the day, use the [*] key to move the cursor to the
left, and [#] key to move the cursor to the right. Move to the time prompt
16 • Omegatrek Owner's Manual