Paging Call (Station Origination Only) - Iwatsu Omegatrek PS6 Owner's Manual

• Basic Features
NOTES:
• If the Portable Station is specified in database programming to ring for
incoming calls received on a particular line, you can also answer incoming
calls just by pressing [Send] (without pressing the line key).
• When the Any Key Answer feature (menu 54) is ON you can answer
incoming calls by pressing any dial pad key. The Portable Station needs to
be specified in database programming to ring for that line.
• If the Portable Station is specified in database programming to ring for
incoming calls on a particular line the station will display Caller ID if it is
delivered with the call on that line.
• When the PS Quick mode (Menu 52) is ON and the Portable Station is in
the charger, you can answer incoming calls just by lifting the Portable
Station from the charger.
• If you press [End] while the Portable Station is ringing (or vibrating), you
can stop the ringing (or vibrating) for that incoming call only.
• If an outside line is not available you cannot place an outside line call. Try
again later.

Paging Call (Station Origination Only)

You can make an announcement through the speakers of key telephones and
external paging speakers.
1. When the Portable Station is idle, press [Send]. Wait for the intercom dial
tone. The [Send] key lights and intermittently flashes.
2. Enter the desired paging access code.
Enter the 'All Call', 'Group Call', or 'Zone' Paging Access Code.
n
3. Make an announcement.
28 • Omegatrek Owner's Manual