Tilting Table
To make beveled cuts, the table can be tilted as
indicated below:
Model
G0513, G0513A40 .................... 10° left, 45° right
G0513X2, G0513X2BF ............... 5° left, 45° right
A table tilt scale with pointer is provided on the
trunnion, and a positive stop is provided for quick-
ly returning the table back to 0° from a right-tilt
setting (see Figures 65–66).
Note: The tilt scale on the trunnion serves as a
guide only. For more accurate results use a bevel
gauge or protractor to set the desired table tilt rela-
tive to the blade.
Models G0513 & G0513A40
Table Tilt Scale on
Opposite Face
Table Tilt
Lock Lever
Figure 65. Table tilt controls
(G0513 and G0513A40 rear view).
G0513 Series Bandsaws (Mfd. Since 08/22)
Tilt Specifications
Table Tilt Knob
Models G0513X2 & G0513X2BF
Table Tilt Scale
Table Tilt
Lock Lever
Figure 66. Table tilt controls
(G0513X2 & G0513X2BF rear view).
To tilt the table:
1.
DISCONNECT MACHINE FROM POWER!
2.
Loosen the lock lever to enable table move-
ment.
3.
Use the table tilt knob/lever to adjust the
angle of the table as displayed on the angle
indicator scale.
4.
Secure the table with the lock lever/knob
before continuing operation.
Table Tilt
Lever
-45-