Airmotiv A1 - Emotiva airmotiv + User Manual

AIRMOTIV SPEAKERS

Airmotiv A1

The Airmotiv A1 is a two way loudspeaker, featuring a 32 mm Airmotiv folded ribbon tweeter and
a 4 inch woven fiber woofer, which can be used as a wall mounted direct firing surround sound
or height channel speaker, or a ceiling bounce height channel speaker, with any standard or
immersive surround sound system.
The Airmotiv A1 is designed to work perfectly with both standard surround sound systems, and
the new immersive surround sound systems, like Dolby Atmos and DTS-X, in a wide variety of
listening room conditions.
Driver Complement
High frequency driver: 32 mm Airmotiv folded ribbon tweeter.
Low frequency driver: 4 inch woven fiber cone.
Cabinet type: Sealed.
Electrical Specifications
Efficiency: 85 dB (2.83V/1m).
Power handling: 60W continuous / 120W peak.
Nominal impedance: 4 ohms.
Frequency response (switch in flat position): 75 Hz - 28 kHz (+3/-3 dB).
Boost (switch in +3 dB position, recommended for reflection mode): approximately +3 dB @ 7 kHz.
Mechanical
Dimensions: 10 inches long x 6-1/8 inches wide x 5-1/8 inches thick.
Weight: 7.5 pounds.
Mounting (configuration #1): Wall mounted (rear bracket with keyway and rubber feet provided).
Mounting (configuration #2): Facing upwards to reflect off ceiling (rubber feet provided).
Grille: Black cloth over a rigid frame; attaches securely with powerful magnets for easy removal.
(Two interchangeable grills provides: flat grill and countoured directivity control grill).
Page 18