Airmotiv T2 - Emotiva airmotiv + User Manual

Airmotiv T2+

AIRMOTIV SPEAKERS
The Airmotiv T2+ is a three way, floor standing, tower
loudspeaker, featuring a 32 mm Airmotiv folded ribbon tweeter,
a 5-1/4 inch woven fiber midrange, and dual 8 inch woven fiber
woofers. The Airmotiv T2+ can be used in an audiophile stereo
setup, or as a main front speaker in a home theater installation,
or you could use a full set of Airmotiv T2+'s as the basis of a really
high end home theater installation.
Driver Complement
High frequency driver: 32 mm Airmotiv folded ribbon tweeter.
Midrange driver: 5-1/4 inch woven fiber cone.
Low frequency drivers: 8 inch woven fiber cones (2).
Cabinet type: Rear ported .
Electrical Specifications
Efficiency: 91 dB (2.83V/1m).
Power handling: 200W continuous / 400W peak.
Nominal impedance: 4 ohms.
Frequency response: 35 Hz - 28 kHz (+3/-3 dB).
Dual speaker terminals for bi-amping or bi-wiring.
Mechanical
Dimensions: 42-11/16 inches high x 12-3/16 inches wide
x 12-1/4 inches deep.
Weight: 56.9 pounds.
Mounting: Permanently attached outrigger feet with
rubber pads (detachable adjustable spikes included).
Grille: Black cloth over a rigid frame; attaches securely with
powerful magnets for easy removal.
Page 11