Page 4
TABLE OF CONTENTS, CONTINUED Connections Connection Tips for Superior Sound ERT/ERM/ERD Standard Connection Diagrams ERT/ERM Bi-Amp Connections Limited Warranty Service Assistance for ERT/ERM /ERD Loudspeakers Emotiva Disclosure 4 ...
1. Objects that have fallen, or liquid has been spilled into the speakers or the connections; or 2. The Emotiva ERT/ERM/ERD Loudspeakers have been exposed to rain; or 3. The Emotiva ERT/ERM/ERD Loudspeakers do not appear to operate normally or exhibit a marked change in performance; or 4.
Gently lift out the speakers and remove all the packing material and accessories. It is important to save all the packing materials and the box in case your Emotiva ERT/ERM/ERD Loudspeakers ever need to be moved or shipped back to the factory for service.
Emotiva ERT/ERM/ERD Loudspeakers Proprietary Design Emotiva ERT-8.3/ERM-6.3/ERM-6.2 Loudspeakers are designed in cooperation with loudspeaker guru Vance Dickason, author of ‘The Loudspeaker Design Cookbook.’ All Emotiva transducers, crossover networks and internal components are custom designed and specifically built for use in Emotiva loudspeakers. Transducers •...
Cabinetry • Non-reflective, satin black lacquered, hand finished cabinets - Designed to enhance the home theater experience by ‘disappearing’ in a darkened theater. In a fully lit room, they present an elegant understated appearance. • Highly braced and critically damped MDF construction - Highest quality MDF with 25mm front and rear baffles for uncolored sound and low resonance.
ERT/ ERM Front Views/Size Comparison From left to right: ERM-1: 9.5" deep x 7.75" wide x 13.5" high ERM-6.2: 11" deep x 9.25" wide x 16" high ERM-6.3: 9.5" deep x 8.5" wide x 26" high ERT-8.3: 13.25" deep x 10" wide x 43.75" high, including feet (42.5" high without feet) 10 ...
ERT-8.3/ERM-6.3 Custom Sound Tailoring Controls 1. Tweeter Level Adjustment Cuts or boosts tweeter level. Settings are: ‘+2’, ‘-2’ and ‘0’ (neutral position). 2. Tweeter Level ‘Extension’ In addition to the tweeter level adjustment, ERT-8.3 and ERM-6.3 speakers have an ‘Extension’ control. On the ‘Low’...
ERM-6.2/ERM-1 Custom Sound Tailoring Controls 1. Tweeter Level Adjustment Cuts or boosts tweeter level. Settings are: ‘+2’, ‘-2’ and ‘0’ (neutral position). 2. Boundary Compensation Compensates for the ‘booming’, or unpleasant increase in the upper range of the bass, due to being close to a wall or large piece of furniture.
ERD-1 Front and Back Views with Expanded Control Panel 1. Mounting Screws These are used to attach the ERD-1 to the wall mounting plate. They are not intended to sit flush with the cabinet. (details on wall mounting ERD-1 speakers: page 20) 2.
ERD-1 Di-pole/Bi-pole Switch Configurations ERD-1 Surround Speakers are designed to move sound through the listening space, and accomplish this through the use of dual tweeters. These can be configured in four possible switch positions which determine the speaker’s role as Bi-pole, left or right side Di-pole, or left/right inverted Bi-pole. Left/Right Bi-pole This switch configuration has BOTH tweeters in polarity with the midrange driver.
The subsequent section on Speaker Placement Tips will also help you determine some of the ideal positioning of your new Emotiva speakers based on the configuration of your room, furniture, and other components.
15 or more feet apart, or using the ‘Far’ position in a smaller room, when trying to create a broader soundstage. Front Speakers You should closely follow Emotiva’s speaker placement recommendations with the addition of the following points: •...
This is an acceptable approach where the room is wider and the LEFT/RIGHT speakers are further out. Tweeter position: To get the most out of your system, Emotiva recommends that you position your center channel speaker with the tweeter facing down (towards the floor) when the speaker is mounted above your TV, and facing up (towards the ceiling) when the speaker is placed beneath the TV.
Should the surround speaker locations be chosen to be behind the listeners, Emotiva recommends a bi- pole setting to initially evaluate the performance but eliminate the null zone effect. These suggested configurations are the norm, but given personal listening taste, odd room configurations, etc., it is possible...
Installing the Speakers Positioning Left and right front speakers should be positioned so that your TV is exactly centered between them. This will help focus your attention towards the screen. For the best overall imaging, the left speaker should be set exactly the same distance and angle away from your listening position as the right speaker.
Do not use drywall screws to mount these p lates! ) When positioning the plate for hardware location/installation, the Emotiva logo should be facing outwards, towards you, as you p lace it on the wall. ) Use a stud-finder to determine the...
This is a key point to great sound. • Should you have any questions about connection or configuration of any Emotiva products, visit the SUPPORT section of the Emotiva website or call us directly at (877) EMO-TECH ERT/ERM/ERD Standard Connection Diagrams Connect the positive output of the amplifier to the positive speaker binding post.
In a bi-amped connection, two discrete amplifier channels are connected per speaker. This allows the power to be delivered with different levels to tweeters than to the woofer drivers. The passive crossover network still handles the filtering so active preamplifier LP/HP filtering that would take the place of the passive network is not necessary.
LIMITED WARRANTY Emotiva Audio is proud to design and manufacture quality products for the home audio and home theater enthusiast. Your ERT/ ERM/ ERD Speakers have been crafted to perform flawlessly for many years. As a result of this quality and craftsmanship, Emotiva offers the following warranty to owners of the ERT/ ERM/ ERD Speakers.
Emotiva Disclosure Copyright 2009 Emotiva All Rights Reserved. Emotiva reserves the right to make improvements to its products at any time. Therefore, the specifications of the product and the specific details of this manual are subject to change at any time.