Airmotiv T1 - Emotiva airmotiv + User Manual

Airmotiv T1+

AIRMOTIV SPEAKERS
The Airmotiv T1+ is a three way, floor standing, tower
loudspeaker, featuring a 32 mm Airmotiv folded ribbon tweeter,
a 5-1/4 inch woven fiber midrange, and dual 6 inch woven fiber
woofers. The Airmotiv T1+ can be used in an audiophile stereo
setup, or as a main front speaker in a home theater installation,
or you could use Airmotiv T1+'s all around in a high end home
theater installation.
Driver Complement
High frequency driver: 32 mm Airmotiv folded ribbon tweeter.
Midrange driver: 5-1/4 inch woven fiber cone.
Low frequency drivers: 6 inch woven fiber cones (2).
Cabinet type: Rear ported.
Electrical Specifications
Efficiency: 88 dB (2.83V/1m).
Power handling: 150W continuous / 300W peak.
Nominal impedance: 4 ohms.
Frequency response: 37 Hz - 28 kHz (+3/-3 dB).
Dual speaker terminals for bi-amping or bi-wiring.
Mechanical
Dimensions: 38-1/4 inches high x 9-7/8 inches wide
x 11-5/8 inches deep.
Weight: 40.1 pounds.
Mounting: Permanently attached outrigger feet with
rubber pads (detachable adjustable spikes included).
Grille: Black cloth over a rigid frame; attaches securely with
powerful magnets for easy removal.
Page 10