Airmotiv T3 - Emotiva airmotiv + User Manual

Airmotiv T3+

AIRMOTIV SPEAKERS
The Airmotiv T3+ is a three way, floor standing, tower
loudspeaker, featuring a 32 mm Airmotiv folded ribbon tweeter,
dual 5-1/4 inch woven fiber midranges, and three 8 inch woven
fiber woofers. The Airmotiv T3+ can be used in an audiophile
stereo setup, or as a main front speaker in a home theater
installation, or you could use a full set of Airmotiv T3+'s as the
basis of an unsurpassed home theater installation.
Driver Complement
High frequency driver: 32 mm Airmotiv folded ribbon tweeter.
Midrange driver: 5-1/4 inch woven fiber cones (2).
Low frequency drivers: 8 inch woven fiber cones (3).
Cabinet type: Dual rear ports.
Electrical Specifications
Efficiency: 91 dB (2.83V/1m).
Power handling: 250W continuous / 500W peak.
Nominal impedance: 4 ohms.
Frequency response: 22 Hz - 28 kHz (+3/-3 dB).
Dual speaker terminals for bi-amping or bi-wiring.
Mechanical
Dimensions: 49-1/2 inches high x 12-1/2 inches wide
x 17 inches deep.
Weight: 85 pounds.
Mounting: Permanently attached outrigger feet with
rubber pads (detachable adjustable spikes included).
Grille: Black cloth over a rigid frame; attaches securely with
powerful magnets for easy removal.
Page 12