Specifications ....................... 6 Mounting Dimensions and Clearances ................. 7 Choosing A Location For Your Speakers ..............8 Mounting Your Speakers ....................9 Connecting Your Speakers ..................11 Changing The Color Of Your Speakers ..............11 Emotiva Audio Corporation Limited Warranty ............. 12...
The Airmotiv Vaulta ATL-6.5 All Terrain Loudspeaker is a two-way loudspeaker that is perfect for use in sheltered outdoor areas like patios as well as in high-traffic indoor areas like restaurants and stores.
AIRMOTIV VAULTA ATL-6.5 Features The Airmotiv Vaulta ATL-6.5 has a long list of features which make it uniquely suited for use in harsh environments like on a sheltered deck or patio. These same features also make the Vaulta ATL-6.5 a great choice for use in high traffic indoor areas like restaurants and stores.
Speaker body THE AIRMOTIV VAULTA ATL-6.5 IS DESIGNED TO PROVIDE RELIABLE SERVICE UNDER HARSH CONDITIONS. However, if possible, it’s still best to choose a location where rain or debris will not directly strike the front of the speaker. REMOVE THE PEEL-OFF ADHESIVE FROM THE INCLUDED RUBBER WASHERS AND STICK THE RUBBER WASHERS TO THE INSIDE OF THE BRACKET ON EACH END AS SHOWN IN THE DIAGRAM.
Choosing A Location For Your Speakers Weather Resistance The Airmotiv Vaulta ATL-6.5 was designed from the ground up to be highly weather resistant. However they will still perform their best, and have the longest possible service life, if sheltered from direct exposure to extreme weather conditions. If possible we recommend mounting the ATL-6.5 under a balcony or eave, or under a deck or porch...
It is usually simpler to run your speaker wiring after you choose the location for your speakers but before you mount the speakers. The Airmotiv Vaulta ATL-6.5 is a standard passive loudspeaker so you will need to run a two-conductor speaker cable from your amplifier or audio source to each one.
Page 12
AIRMOTIV VAULTA ATL-6.5 Installing The Speaker In The Bracket. Our Safe-Snap mounting system allows you to mount the bracket first. Then, once the bracket is securely mounted, you can snap the speaker into the bracket. The speaker will remain securely snapped into the bracket while you install the mounting screws and tighten them to prevent the speaker from tilting or moving.
AIRMOTIV VAULTA ATL-6.5 Connecting Your Speakers The Airmotiv Vaulta ATL-6.5 has a nominal impedance of 4 Ohms and can be easily driven by any amplifier with an output power of between 25 watts and 150 watts per speaker. Most modern audio amplifiers and distribution systems or volume controls are designed to work with speakers between 4 Ohms and 8 Ohms and will work just fine with the Vaulta ATL-6.5.
(or click on the QR code): www.emotiva.com/warranty For more information about the AIrmotiv Vaulta ATL-6.5, or information about other Emotiva products, please visit our website at: www.emotiva.com Airmotiv Vaulta ATL-6.5 User Manual v2.4...