General Cleaning; Cleaning The Outside - Intermec 6820 Series User Manual

General Cleaning

Cleaning the Outside

6820 Series 80-Column Printer User's Manual
CAUTION: Do not use glass cleaners with ammonia. Permanent
damage to the printer cover will occur if such glass cleaners are used.
CAUTION: Do not use abrasives or solvents (or any product
containing these substances) to clean any part of the unit. Permanent
damage to the printer will occur if such substances are used.
CAUTION: Never use ketonic solvents (acetone or ketone) or
aromatic solvents (toluene or xylene) to clean any part of the printer.
Doing this can damage the printer.
Note: MICRO-CLEAN II is the only cleaner recommended for this pur-
pose. Other cleaners can damage the case.
Note: GUIDE SHAFT CLEANER is recommended for cleaning your
80-column printer guide shafts. Cleaning the printer guide shaft can re-
duce the number of head jams caused by dirt and buildup.
Note: Both cleaners are sold separately. See "Inside Sales" in Chapter 1 for
ordering information and part numbers.
Periodic cleaning helps maintain the appearance and reliability of the
printer. When cleaning the printer, inspect both the outside and the inside
for obvious signs of damage, wear, or impending failure.
Do not pour liquid cleaners directly on the printer case. Instead, dampen a
soft, lint-free cloth with a quality cleaner and clean the exterior surfaces
with this cloth. Do not use solvent solutions. Inspect the dc power jack, all
cables, and the remote terminal holder or vehicle dock for damage.
—
Chapter 3 Maintenance
27