Intermec 6820 Series User Manual page 64

—
Chapter 4 Using the 6820 Printer Configuration Utility
48
If you click OK, and if the default configuration file is not successfully
loaded into the working configuration (such as an illegal directory), then
the following error message appears. Click OK to return to the Main
Menu without loading a file.
If the default configuration file is successfully loaded into the working con-
figuration, a message, as shown below, is displayed. Click OK to continue
with the Restore Defaults to Printer operation.
Attempting a Connection to the Printer
If the default configuration was successfully loaded into working configu-
ration, then a message is displayed, prompting you to reset the printer.
Connection Failed
If the connection is not successful, after approximately 20 seconds, the fol-
lowing message is displayed.
Click Yes to repeat the previous steps, above, starting with Attempting a
Connection to the Printer. If you click No, an error message (as shown be-
low) is displayed. Click OK to return to the Main Menu without saving
the default configuration to the printer.
Connection Successful
If the operation was successful, your 6820 Printer is now set to the default
configuration in flash memory, and you are returned to the Main Menu.
6820 Series 80-Column Printer User's Manual