Bluetooth Adapter Indicators
6820 Series 80-Column Printer User's Manual
The interfaces on the Bluetooth adapter that allow for the different modes
are detailed below:
700 Series or CK60 Handheld Computer to 6820 Pass Through
Note: Pass through printing requires shutting down the Bluetooth portion
of the adapter. To reenable Bluetooth functionality after you finish pass
through printing, press a button on the control panel to wake the printer.
When DTR on the 700 Series or CK60 Handheld Computer is set, the
adapter board automatically opens a path between the 700 Series or CK60
Handheld Computer and the 6820 Transition/DC Board and powers
down the Bluetooth module. Testing the DSR pin to reflect DTR allows
the mobile computer to differentiate between a Bluetooth-equipped termi-
nal holder and a non-Bluetooth equipped terminal holder.
700 Series or CK60 Handheld Computer to Bluetooth Module
Communication Interface
The Bluetooth adapter allows a 700 Series or CK60 Handheld Computer
to communicate directly with the Bluetooth module under two circum-
stances.
S When the configuration settings of the Bluetooth module are to print.
S When the Bluetooth module requires reconfiguration.
—
Chapter 6
Bluetooth Adapter
97