Inserting A 61Xx, A 600 Series, A 700 Series, Or A Ck60 Computer - Intermec 6820 Series User Manual

—
Chapter 2 Operation

Inserting a 61XX, a 600 Series, a 700 Series, or a CK60 Computer

(A)
1
2
24
Do the following to insert a 61XX, 600 Series, 700 Series, or CK60 Com-
puter into the terminal holder:
1 Insert the top of the computer into the terminal slide retainer.
2 Use the computer to push the terminal slide all the way in the direction
shown. See part A in the following illustration.
3 Lower the connector end of the computer into the terminal holder.
4 Slide the computer to fully seat it in the docking connector. See part B
in the following illustration.
1. Top (display) of computer inserted in terminal slide retainer
2. Docking connectors
This illustration shows a 700 Series computer.
(B)
6820 Series 80-Column Printer User's Manual