Loading Paper Tray; Fixed Mount And Portable Printers; Wall Mount Printer; Loading The Flat Paper Tray - Intermec 6820 Series User Manual

—
Chapter 2 Operation

Loading Paper Tray

Fixed Mount and Portable Printers

Wall Mount Printer

18
Note: Do not exceed the recommended amounts of paper quantity or
thickness. When loading multiple-sheet paper, be sure to have the original
faced up, with the leading edge towards the rear of the printer.
1 Unlatch and raise the printer mechanism.
2 Lower a stack of paper, with the original faced up, into the paper tray
under the printer mechanism.
S The fixed mount printer holds up to 200 3-ply forms (about 2" or 5
cm thick).
S The portable printer holds up to 50 3-ply forms (about an inch or
2.5 cm thick).
3 Pull the top form out and over the rear of the printer mechanism. Low-
er and latch the printer mechanism.
Paper tray
(beneath printer
mechanism)
The wall mount printer can load paper from either an optional flat paper
tray or an optional compact paper tray.

Loading the Flat Paper Tray

If you have a flat paper tray attached to the wall mount printer, hold a
stack of paper, up to 2.5 inches (6 cm) thick, with the original facing you,
and lay the stack flat into the tray. Pull the top form out to load into the
printer.

Loading the Compact Paper Tray

If you have a compact paper tray attached to the wall mount printer, do
the following to load paper into that tray:
1 With the original facing you, hold a stack of paper, up to 2.5 inches (6 cm)
thick, vertically over the compact paper tray.
6820 Series 80-Column Printer User's Manual
Printer mechanism
(raised)